Axiom Co., Ltd. HOW SOFT?  The Axiom Biosensor Knows!
OTHER SYSTEMS


BIOMECHANICAL ANALYSIS SYSTEM

Biomechanical Analysis SystemThis system can be equipped with different types of Biosensors, such as the Catheter-Type or the Needle-Type, for various research purposes to obtain highly accurate stiffness measurements of samples, including extremely small ones. The system's motor, which is computer-controlled, drives the arm, to which the Biosensor is attached, vertically in order to effect depression in minimum increments of 1 mmm, from a minimum depth of 25 mmm to a maximum depth of 25 mm. The tray with the sample to be measured rests on a scale which records the resulting pressure in minimum increments of 1 mg.

The platform on which the scale rests can be manipulated in any X-Y direction by rotating the dials below it. Additionally, the entire section in which the actuator and the arm for sensor attachment are located can be vertically adjusted for the Z direction. Thus, any portion of the sample can be measured without handling the tray.

BAS measurement unit BAS control unit

Biomechanical Analysis System Measuring ArmThis system is most suitable for ex-vivo research measurements and has been used for research on bladder and prostatic tissue samples.

Specifications:

  • Minimum Depth: 25 mmm (adjustable in 1 mm units)
  • Maximum Depth: 25 mm
  • Minimum Pressure: 1 mg (adjustable in 1 mg units)
  • Time Cycle: adjustable from 1 minute to 10 minutes
  • Frequency: depends on type of Biosensor in use

Back to Top Back to Top

OTHER SYSTEMS: CATHETER | HANDY | NEEDLE2 | PEN | ROD | VENUSTRON
 

HOME | COMPANY INFO | EXPLANATION | SYSTEMS | RESEARCH | SAMPLE DATA | NEWS | FAQ | CONTACT | JAPANESE

cprt.gif (859 bytes)1996 Axiom Co., Ltd.
22-2 Kashiwayama-machi, Koriyama-shi, Fukushima-ken, Japan
Tel: +81-24-962-0277 Fax: +81-24-962-0278 E-mail: info@axiom-j.co.jp